The following article will introduce to you:
How to clean and maintain acrylic wall lamps?
Here is a complete guide to cleaning and maintaining acrylic wall lamps, providing professional advice based on material and environmental characteristics:
🔧 Daily cleaning steps
Basic dust removal
Gently brush the surface with a dry microfiber cloth or electrostatic precipitator brush to avoid scratches caused by dust accumulation and friction.
Stain treatment
Ordinary stains: Soak a soft cloth in a 1:1 mixture of white vinegar and water, gently rub in circles, and immediately wipe with clean water. Acetic acid can gently dissolve stains without damaging the material.
Oil stains: Apply a small amount of makeup remover oil to the stain, let it sit for 1 minute, and then clean it with neutral detergent to avoid oil residue.
Stubborn stains: Special acrylic cleaner sprayed on soft cloth for local treatment, strong acid and alkali solvents are prohibited.
Water stain prevention
After cleaning, be sure to use a dry cloth to absorb the moisture and prevent water marks from accumulating and affecting the transparency.
⚠️ Key maintenance criteria
Sunscreen and anti-aging measures
Avoid direct sunlight, as ultraviolet rays can cause acrylic to turn yellow and brittle. Outdoor use requires the selection of UV resistant panels and the installation of light shields.
Temperature control
Stay away from high temperature environments such as heating and fire sources (>70 ℃, prone to deformation), and keep the clean water temperature below 40 ℃.
Physical protection
Do not use steel wire balls or rough cloths to wipe, handle gently during transportation to avoid collision and breakage.
Regular in-depth maintenance
Apply acrylic special care agent to the surface every quarter to form a protective film, improving scratch resistance and transparency.
❌ Taboo behavior
Using alcohol, acetone –>surface dissolution cracking
Scrape off dirt with a blade ->permanent scratches
High temperature steam cleaning ->deformation and distortion
💡 Professional tip:
If there are slight scratches, they can be repaired by using toothpaste combined with a soft bristled toothbrush for one-way polishing; Deep damage is recommended to be returned to the factory for polishing treatment.
